Google
Based on 104 reviews

Window & Door Repair in Ridgewood, NJ

Prewar wood sash in Ridgewood can be reglazed, eased and refitted in its own frame. The house keeps its look, and you keep the old wood.

Emergency services available! Follow us:

Get a Free Estimate

Tell us what's wrong and we'll recommend the right repair.

Owning a Ridgewood house from before the war often means owning windows older than anyone living in it. A cracked corner pane, a bottom rail that scrapes and a latch that never meets its plate are the usual troubles in wood sash. Ridgewood also has Ho-Ho-Kus Brook and the Saddle River, and wood near low, damp ground can swell and stick in a wet season. If your house is inside the Village Center Historic District, the Village should know before any work changes the look from the street.

A window sash with new glass lying on a work table

If you have a cracked pane or glass that has fogged

Before you call anyone, study the glazing compound where the glass meets the wood. Gaps, crumbling edges or a thin line of daylight mean the glass has been working loose, and a corner crack often follows. The pane itself comes out, the groove is cleaned out, and new glass is set with fresh glazing. In door panels and low panes, where code requires it, we use tempered glass.

A fogged double pane means its seal gave out. We replace only the glass and leave the sash alone. On old steel casements and wood sash, the job is often just the glass and its glazing, not the whole window.

Will the work make a mess?

Most of our work is done at the window. We lay down cloths, keep the cutting to a small area and vacuum when we are finished. Glass is the exception: a broken pane means careful sweeping, and we check the floor and the sill before we go.

Check how the bottom of the sash meets the sill

Stand inside and look at the bottom corner of a sash that drops or sticks. If that corner is dragging on the wood below, the sash has sagged. Old cords and weights stretch and break, and in steel or aluminum units the rollers wear flat. Either way the weight shifts and the sash drops in the frame.

Depending on what is inside, the sash is rehung with fresh rollers or a replacement balance. Frame and glass are not disturbed, so the sash simply slides up and down again.

A sash that sticks high on one side is a related problem. The same repair usually fixes it, and we square the sash in the frame while we are there.

An old metal latch on a wood window
An old metal latch on a wood window

Check the plate before you buy a new lock

Many owners believe that a door whose bolt will not catch needs a new lock or a new door. Often the lock is fine. Shut the door and look at whether the bolt is aimed at the opening in the plate. If the bolt lands high or low, the door has dropped a bit. The handle set gets tightened and re-seated, and the plate is shifted if needed. The old hardware, which is often better made than what is sold now, then does its job again.

FAQ

Questions from Ridgewood homeowners

My wood sash has been sealed with paint for years. Will it open?

It depends on how much paint is in the joint and whether the wood is sound. A light seal frees with careful scoring. A heavy, old build-up takes longer, and soft wood in the sash changes the plan.

A leaded section in my window clunks as it moves. Why?

The weight of the lead panel can strain the cords or balance, and the cord or pulley is usually the part that fails. A new cord or balance is fitted, and the glass is not touched.

Moisture sits trapped in our entry door glass. Which fixes are possible?

The fog is moisture trapped between two panes. Replacing only the glass is cheaper than a new door. A door in sound shape is worth keeping.

What makes our French doors clatter in a gale?

Worn weatherstripping and loose hardware let the panels move.

How do I get a price?

Call us or fill out the short form at the top of this page. The estimate is free.

Free Estimate

Need a Window or Door Repaired in Ridgewood?

Tell us what's wrong and we'll recommend the right repair.

Request an Estimate

Get a Free Estimate